Canon imagePROGRAF iPF PRO 4000 Drivers Download

Advertisement

Canon imagePROGRAF iPF PRO 4000 Drivers Download

Canon imagePROGRAF iPF PRO 4000 Drivers Download – As I specified in a current post, my old huge configuration printer has surrendered the apparition, so I’ve recently had another Canon imagePROGRAF PRO-4000 introduced, and today I will walk you through a portion of the key new highlights and give my supposition of this new printer.


Group imagePROGRAF PRO-4000 Printer Review

Cutting straight to the chase, with my old 24″ iPF6350 breaking after only six years, for a couple of moments, I considered moving far from Canon for my huge organization printing, yet then I understood that there was another line of huge configuration printers that has quite recently been declared, so I chose to investigate, and was extremely energized by what I saw.

At first, I was essentially going to supplant my 6350 with the PRO-2000, which is the successor 24″ wide move media printer, yet in spite of the fact that this new scope of PRO printers are smaller, they are more than double the stature, which implies the PRO-2000 can’t be conveyed up to my third floor studio. It basically won’t fit around the highest point of the stairs, even remained on end.

There was a choice to have it crane lifted up to the third floor and go in through the window, however this would cost $1,500, and afterward obviously another $1,500 to have it brought down again in the event that I move, or when it unavoidably breaks again sooner or later what’s to come.

I assumed if I would spend another $3,000 I should put that cash towards an imagePROGRAF PRO-4000, which is the 44″ wide huge sibling of the PRO-2000, and have that introduced on my second floor rather than up in my studio. What’s more, when I say enormous sibling, I truly do mean BIG, as should be obvious in this photograph of me with the printer in the wake of having it introduced (beneath).

Before singing the agreement, I went to the Canon S Tower here in Tokyo and made various vast prints on three sorts of Breathing Color media, and I was extremely content with the outcomes. Note that I did my tests on the PRO-2000, preceding I heard the cost for the crane lift, yet the 2000 and 4000 are basically indistinguishable aside from the width of move media that can be utilized. This additionally implies this survey will be similarly as valuable in the event that you are thinking about the PRO-2000 as it will for the PRO-4000.


Anyway, my PRO-4000 touched base on August 9, and took four individuals to convey it up to the second floor, and put it onto its stand. I have since spent the most recent five days setting it up, making my ICC profiles, and becoming acquainted with this excellent new bigger organization printer from Canon.

What’s New?

Before we take a gander at a few prints, we should speak a little about what’s new with the PRO-4000. All things considered, Canon have discharged another arrangement of inks for this lineup called LUCIA PRO ink, which really decreases the quantity of hues from 12 to 11 shade inks, yet they included another Chroma Optimizer.

 

From the Canon site, I see that “LUCIA PRO ink definition incorporates miniaturized scale embodied colorants that empower smooth angles, an extended shading range, and more profound shading articulation.” In numerous ways, I concur with this announcement, however I’m really not persuaded that the shading array is extended. Truth be told, for some particular circumstances utilizing matte media I’d the range has been gotten a bit, however I’ll speak more about this later…

The Chroma Optimizer is utilized when imprinting on reflexive and semi-shiny media, and goes about as a reasonable coat, enhancing shading and advances the dim territories of gleam prints. The new inks and Chroma Optimizer are additionally said to enhance scratch protection and decrease graininess. We’ll investigate some real prints instantly.

I was likewise cheerful to find that the dark line that was constantly left on the correct underside of the prints is never again an issue. That is something that pester the damnation out of my about my iPF6350 and I realize this was not settled the 6450, so it’s pleasant this is at long last settled.

Just a single Print Head

While my old printer had two print heads, costing around $300 each, the new PRO printer lineup utilize only one, 1.28″ wide print head with 18,432 spouts and hostile to stopping up innovation. This new print head costs around $500, so there’s a $100 sparing when that should be supplanted, accepting that you’d change the two heads on the old models obviously. Having quite recently the one head likewise empowered Canon to make the printer smaller in width, which is a decent space saver.

Having quite recently the one print head additionally empowered Canon to accelerate the printing significantly. A 18 x 24 inch print on my old printer used to take around 9 minutes, however with the new PRO-4000 a similar size print takes surmised 3 minutes 40 seconds.

New Media Loading Mechanism

The media stacking system has likewise been completely changed. You now stack the move from the front of the printer by opening the Top Cover and the Output Guide as should be obvious in this photograph (underneath). In the wake of dropping the media on its holder into put, you turn the move holder which directs the media up into the printer, until the point when you hear a beep, to tell you that the printer would now be able to encourage the media.

 

At that point, you close the two covers and press a catch the LCD show to advise the printer to simply ahead and sustain the paper. Not exclusively does this mean we don’t need to touch the paper to such an extent, we likewise now have the advantage of the paper being topsy turvy for more often than not before it’s imprinted on.

This is an advantage since it implies that clean is more averse to settle on the print side of the media as you print, and tidy that is as of now on the media, will probably tumble off, before it’s imprinted on. In the event that you print on clean, the tidy for the most part tumbles off as the print dries, leaving a white spec, and for the quality cognizant printer that implies that the print has be made again without any preparation.

Media Information Update

Another exceptionally pleasant touch that I’m almost certain I couldn’t do with my old iPF6350, is that you can refresh the Media Information in the printer drivers on different PCs. Some time recently, in the event that I included a custom media sort, similar to a move of Breathing Color paper, to the printer, to get that same media in the drivers on an alternate PC, I needed to utilize the Media Configuration Tool and include the media once more.

Presently, you can simply go to the printer drivers and open up the Printer Utilities, and select Media Information from the pulldown, and tap the catch to refresh the media. This at that point goes to the printer and looks at the media data on the printer, and if it’s distinctive to the media that the printer drivers think about, it will refresh this data for you. It’s extremely smooth, and an exceptionally welcome element.

Wifi and Gigabit Ethernet Connectivity

The PRO arrangement of printers now likewise underpins Wifi Connectivity and the wired system interface is currently Gigabit Ethernet. We can likewise still associate with the printer with USB. You would now be able to print PDF and JPEG archives straightforwardly from a memory stick also.

I have now printed with Wifi, LAN and USB, and observed Wifi to be a little on the moderate side for a respectable estimated print, so I purchased a 10 meter USB link so I can print from my eating table, which truly speeded things up. Despite the fact that it’s just High Speed USB2, it’s significantly quicker than Wifi.

I likewise really purchased a 20m Ethernet link, with the goal that I can connect the PRO-4000 specifically to my switch on the 3F on the off chance that I have to do a considerable measure of work from the studio. With USB being so quick, I don’t know I’ll do this regularly, yet I at any rate now have the choice.

Three Sizes of Ink Tanks

Another extraordinary change as I would like to think is the capacity to now look over three sizes of ink tanks, with 160ml, 330ml, and 700ml tanks accessible. My old iPF6350 took 130ml ink tanks, so even the littlest of the new tanks holds 30ml more ink. I could top off the new PRO-4000 with 160ml tanks, yet now having the alternative to introduce bigger tanks, and blend and match the sizes, implies we can choose the tank measure in view of how rapidly the inks rundown.

The PRO-4000 accompanies an arrangement of ink cartridges holding 190ml. Before we introduced the cartridges into the printer, I took this photo for examination (underneath). On the left is a 190ml cartridge, and on the privilege is a 700ml.

I have likewise gotten somewhere in the range of 330ml cartridges, and would incorporate one in this photograph as well, however they are really an indistinguishable size from the 190ml cartridge you see here. The main contrast is that they aren’t as vigorously indented as this 190ml cartridge. You perceive how it is inset where it says Canon and the white mark is? The 330ml cartridges don’t go in that far, that is the main distinction.

Blend and Match Inks

In the course of the most recent six years that I’ve been utilizing my old huge organization printer, I’ve discovered that since I do a considerable measure of high contrast printing, the Matte Black and Photo Black, and the Gray inks tend to rundown the snappiest, so I have purchased a 700ml tank for the Matte and Photo Blacks and the Photo Gray. So I could demonstrate to you the distinction in estimate however, I requested a 330ml Gray, for examination with the starter inks, just to discover they were a similar size, as I just specified.

I likewise purchased a 700ml tank for the Chroma Optimizer, in light of the fact that I’ve heard this keeps running down before long. At somewhat more than $300 a fly for the 700ml ink tanks however, I figure I will abstain from utilizing 700ml tanks for everything except the substantial use blacks and grays, unless I begin to take many more normal print arranges that is. The good thing however is that we now have this alternative, and having the capacity to blend and match tank sizes is extraordinary!

driverdownloadsupport.com is the safest place to download your driver, please feel free to obtain the Canon imagePROGRAF iPF PRO 4000 Drivers Download from this site without hesitated.

Installation instruction :

  1. Download the Driver file based on your OS (operating System) type and series
  2. When everything has been plugged in turn the printer and the PC/Laptop/ computer on .
  3. Double click the downloaded driver file and then click the Setup or Install file.
  4. Follow the installation wizard and further instruction
  5. The Canon imagePROGRAF iPF PRO 4000 Drivers Download is installed and the printer is ready to use
  6. Try to print the test page, If the printer is able to perfectly print the page, your printer is installed and setup properly. However, if the printer are not able to do the task, try to follow repeat instruction.

Canon imagePROGRAF iPF PRO 4000 Drivers Download Links

Download
Category
Windows all versions 32bit
Windows all versions 64bit

Download
Category
OS X 10.9,OS X 10.8
Mac OS X 10.6

Download
Category
Linux (RPM/DEB)